CAJON-EEZ CAJON PRODUCTS
NOW BACK IN STOCK! ORDER NOW!
(Temporary Webstore)
Cajon-Eez on Youtube
Cajon-Eez on
Facebook
Contact Cajon-Eez
(Click here for Behringer Products I make/sell... see below or
click here)
NEW: Cajon-Eez Cajon Pedal!... see below or click here (Built-to-order)
CUSTOMERS: ALL orders will need to be shipped using tracking and insurance. Most International orders shipped via USPS Priority International will cost around $50-60 which includes insurance and tracking (OVERSEA ORDERS, PLEASE USE PROPER LINK ABOVE OR EMAIL). Shipping anywhere inside the USA is still $14.99
Note: I only accept Paypal as Payment and
only ship USPS Priority ...
Please use the proper button above (whether inside
our outside the USA)
This is for one Cajon-Eez Cajon Jingle Assembly... custom built and tested by the inventor, Tom Laureanno
(aka "Tommy Cajon"). This assembly includes a Meinl Wooden Nino Cabasa and a custom Jingle assembly mounted on a self-resonating platform that easily mounts to the side of your Cajon using velcro (so it's easily applied or removed). The refined spring design of the jingle arm is compact and has perfect feel and bounce that will not fatigue your hand or fingers. This is the exact Jingle the inventor has been using out live for
6+ years now. The Jingle includes a novel cam adjustment which clamps the cymbals such that you can vary the amount of noise the jingle's 4 stainless cymbals make... there are 7 ratchet-able levels to choose from. The inventor uses this as his Cajon Drum Kit Hi-Hat... the Jingle acts as the closed hi-hat while the Cabasa is used to make the sizzle sound of an open hi-hat... be sure to watch the video below to learn more about this jingle and what it can do... These are not mass-produced (each is built and tested by the inventor)... if you are lucky enough to own one, others will envy you ;) Buy one now while you can because I'm not sure how many I'll be building... Also, please feel free to leave feedback on the Cajon-Eez Facebook page:
http://www.facebook.com/cajoneez
Some videos of this product are shown below
IMPORTANT WARRANTY INFORMATION: I really can not offer a warranty on an item like this as I have no way of telling if the item has been abused or accidentally damaged. The Cajon-Eez jingle has been meticulously designed using finite element analysis and has been proven to not break under normal use (I've broken 1 in 4 years of playing). Normal use means the jingle pad is tapped (not banged). I can not and will not be held responsible for accidental misuse, such as dropping of the jingle, or hitting the jingle with your leg getting on/off the cajon. Accidents like this will cause the jingle to break. If customers take care of the jingle during transport and play, it should last a long time. Every jingle I sell is first played at a gig by myself, just to be sure it's operating correctly. I don't mind repairing broken jingles for customers, but customer will need to pay a small fee for repair parts and shipping back to the customer.
Additionally, please be careful how you store the jingle. It is printed
using PLA plastic and will deform if exposed to too much sun/heat (starts
deforming around 180 degree) so
be sure to shield it from direct sunlight and especially
sun heat (like that in a closed car trunk or similar).
OTHER CAJON-EEZ PRODUCTS FOR SALE
CLICK THIS BUTTON TO VIEW CART AND CHECKOUT USING PAYPAL
Spare Cajon-Eez Jingle Arm (shipped INSIDE USA) - $24.99 + s/h ($5.99)
CLICK THIS BUTTON TO VIEW CART AND CHECKOUT USING PAYPAL
CLICK THIS BUTTON TO VIEW CART AND CHECKOUT USING PAYPAL
Behringer
X-Touch Stands (pair) This is a pair (2) of 3-D printed Stands (PLA
plastic) designed to cradle your Behringer X-Touch controllers (single
or ganged). I was the original designer
of these years ago (I have proof), only to recently find someone in
another foreign country had stolen my intellectual property/idea and is now
cashing in on it by copying my design/idea and selling on Ebay/etc...
... Luckily they are out of the USA else they would have a lawsuit on
their hands. PLEASE DO NOT SUPPORT THESE STEALING SCHMUCKS... Buy
here from the original designer! (cheaper too... thanks!)
These stands prop up the controller to roughly a 70 degree
angle making it easier to reach all controls while also making it easier
to read the LED scribble strips on each channel (as well as see all the
other indicators/LEDs/etc...). The stands come with foam attached such
to gently support the controller as well as provide a grip on the bottom
of the stands. Each stand takes roughly 4+ hours to print so this is a
laborious process and not a simple ejection model process for fast
production.... Get them while you can as I don't plan to make these
readily due to my printers being busy on other projects... ;) $24.99 for
a pair (2) + shipping (anywhere inside US should be $7.99... other areas
would need to be calculated)
Dimensions: 8" tall, 6" deep by 1.25" wide.
$24.99 + 7.99 shipping inside the USA
CLICK THIS BUTTON TO VIEW CART AND CHECKOUT USING PAYPAL