This is a pre-programmed PIC chip (12F629) for the DIYRC.COM's Mini-Beacon LED Controller project.
(Note, this chip is tested prior to delivery and can not be returned due to its sensitive structure... please follow the circuit schematic exactly for this project)
ATTENTION! I now sell these with three (3) different firmware options (see videos below). By default, you will receive the standard/original "Mini-Beacon" firmware unless you select the "Mini-Strobe" or Mini-StroBeacon" firmware below in the firmware options pull-down.
This is a "Mini-Beacon" Rotating Beacon Simulator/Controller (includes one controller as shown, one female mating connector for output pins + 2 jumpers (one for servo control and the other to change flash pattern). This does not include hookup wire or LED...
The User's Manual is here:
For more information check out:
A video of the "Mini-Beacon" in operation is here:
A video of the "Mini-Strobe" firmware in operation is here:
A video of the "Mini-StroBeacon" firmware in operation is here: