$35.99

Mini-Flash LED Controller w/o Programming cable (Built/Tested)
[MF-Cab-Built]

Mini-Flash LED Controller w/o Programming cable (Built/Tested)
NOTE THESE ARE PROFESSIONALLY DESIGNED AND HAND-MADE BY ME!... I PERSONALLY BUILD AND TEST THESE IN THE GOOD OLD USA!

NOTE: I WILL KEEP BUILDING THESE (PROBABLY 4 PER WEEK) SO PLEASE CHECK THE INSTOCK STATUS! YOU CAN ALSO CLICK THIS LINK TO BE NOTIFIED WHEN THE IN-STOCK STATUS OF THIS ITEM CHANGES.

(Includes preassembled & tested controller 8 LED connectors. NO PROGRAMMING CABLE). Does not include LEDs, resistors and wire

Latest Programmable LED Flasher/Sequencer called the "Mini-Flash" ! Check it out at: http://www.diyrc.com/picaxe-miniflash.htm

This project, called "Mini-Flash", is a programmable LED Sequencer/Flasher that is based around the PIC 12F683 microcontroller. It is basically a spin-off of the Pro-Flash Programmable LED Flasher/Sequencer which is based around the larger PIC microcontroller. The Mini-Flash sports the same features as the larger Pro-Flash controller, with the only difference being it can only control 4 LED channels instead of 8. This project also includes the ability to reprogram the LED sequencer using a PC-based (i.e. Windows) program that includes a unique and intuitive Graphical User Interface. In fact, the servo lead which is normally plugged into a spare channel for control, is also used to reprogram the Mini-Flash flasher/sequencer via a computer's USB connection and a Mini-Flash programming cable (not included). The free downloadable programming software also allows the user to "test" the LED sequence they develop by use of software-based graphical representations of the 4 LED channels. The sequence speed can also be programmed by the user. Each sequence contains 50 events and each of the 4 LED channels can be either ON or OFF for every events. If the user wants to develop a sequence with fewer events, this can also easily be programmed. As if these are not enough features, the "Mini-Flash" also includes a control for each of the 4 channels that allows the user to use an R/C servo output (from a R/C receiver) as a "switch" control. This feature allows the user to control (active or inactive) each of the 4 channels in regards to the position of the servo control input. If the user uses a stick/slider as the servo input, the user will be able to define one of 16 "Zone" settings for each LED channel. Read more about the Mini-Flash's operation by viewing the User's Manual !

Mini-Flash User's Manual

FREE Mini-Flash Software !

Below is a customer that used two (2) Mini-Flash controllers for his heli.... How COOL is this!

Another customer used Mini-Flash and Mini-Beacon controllers on one of his helis,... very realistic!


You can download the full Mini-Flash disk which include the proper USB driver for the programming dongle. CLICK HERE to download the latest Mini-Flash Disk w/ USB drivers

You can also view the downloading and installation procedures by clicking HERE!

Reviews

Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
0 items
Manufacturer Info
DIYRC.COM
DIYRC.COM Homepage
Other products
Share Product
Share via E-Mail Share on Facebook Share on Twitter
Currencies