A lil' history ...
Servo
Slowdown device using the
PICAXE microcontroller...
The following PIC R/C
project was emailed to me by
Kevin Goom and consists of a tiny
R/C servo interface that allows the motion of the servo to be slowed down, with
the speed being controlled by a small potentiometer. Kevin had designed
this circuit and code for a few fellow R/C boaters who wanted to slow down the
speed of the rudder servo (sort of scale-like). This small simple circuit
is also great for those R/C airplane retracts and bomb-drops, just to name a few
other useful ideas.
Design Criteria Summary:
1) Base design around a small
8-pin PICAXE
2) Powers off of the receiver power (typically 5 volts)
3) Allows the servo speed to be adjustable (variable potentiometer)
4) See Kevin's PDF file for schematic, PCB ideas
and other pertinent information...
Parts & Tools List
...
1) One PICAXE 12F683 Microcontroller
2) One 470 ohm resistor
3) One 10K ohm resistor
4) One 10K potentiometer
5) One .1uF capacitor
6) One LED (any color)
Building Instructions...
See Kevin's PDF file
for schematic, PCB ideas and other pertinent information...
CLICK HERE!
Firmware/Code...
Click here to
View Code
Click here to
Download Code
Testing and Operation Instructions...
See Kevin's PDF file
for schematic, PCB ideas and other pertinent information...
Additional Notes...
See Kevin's PDF file
for schematic, PCB ideas and other pertinent information...
Earthmen
Productions
© Dec-00-Mar-12
Home | 360 degree Servo | Optoisolators | Servo Noise Traps | Servo Reversers | Servo Reverser | Servo Failsafes | Servo Fail-Safe | Servo Slow-Down | Servo Panner | Servo Sequencer